The filter ( tube filter ) microporous membrane filter adopts imported 304 , 316L stainless steel plate, adopts quick mounting structure, little or no thread, no dead angle, easy to clean, mirror surface polishing inside and outside, diaphragm type pressure gauge, The filter element uses a unique hot-melt welding technology, without any adhesive, no foreign matter release, high cut-off, high throughput, low pressure drop and extensive chemical compatibility.
       This product is widely used in beverage, chemical, pharmaceutical, electronics and other industries.
       The filter element is a collapsible cartridge type microporous membrane filter, using a unique hot-melt welding technology, without any adhesive, no foreign matter release, high cut-off, high throughput, low pressure drop and extensive chemical compatibility. Cartridge housing diameter of 2.7 Yingcun ( both 69mm ) . The length of the cartridge with a 10 , 20 , 30 , 40 inch ( both 250 , 500 , 750 , 1000mm) four kinds , and the filter housing in a sealed manner the plug-in points ( divided into 222 seat and the226 seat ) and the flat nozzle type. The microporous membrane cartridge filter consists of a microporous membrane filter element and a stainless steel housing and the necessary stainless steel piping and valves. The lower part of the filter has a plug-in plate with a filter element, and the plate has a socket for the socket filter element. According to the user's processing flow, the filter has a single core, 3 cores, 5 cores up to dozens of filter elements.

       The filter element is easy to load and unload, the shell is divided into upper and lower parts and fastened with bolts.

● Flow: 0.5m3/h-30m3/h

● Filtration accuracy: 0.1-20μm
● The filter element can be made of polypropylene, nylon, PTFE, etc.
● The barrel body is made of AISI304 or AISI316L material, and the inner and outer surfaces are polished. The surface roughness Ra<0.8μm< p="" >